Tire Tips

Tire Tip #223: Winter Tire Application

Source: Goodyear Product Service Bulletin #2001-38

In order to optimize the handling, stability and traction of vehicles they should be equipped with winter tires, Goodyear makes the following recommendations:

Tire Tip #112: Tire Diameter Variation on 4WD and AWD Vehicles

Source: Goodyear Product Service Bulletin #1999-12

The increasing popularity of 4WD and AWD vehicles with speed-sensitive drive trains requires that careful attention be paid to variations in tire diameter on these vehicles.

Tire Tip #733: Guideline for Speed Rated Tires

Source: Goodyear Product Service Bulletin #2001-08

If tires with different speed-ratings are installed on a vehicle, they should be installed with like pairs on the same axle. The speed-capability will become that of the lowest speed rated tires.

Tire Tip #831: Tire Inflation Recommendations for Auto and Light Truck Tires

Source: Goodyear Product Service Bulletin #2000-29

Maintaining proper tire inflation is the single most important element of tire care. For example, a 4 psi reduction in inflation pressure can result in 10% loss in treadwesr over the life of the tire.

How to determine the correct inflation pressure?

Tire Tip #335: Tire Rotation Recommendations for Auto and Light Truck Tires

Source: Goodyear Product Service Bulletin #2000-28.

Tire rotation is extremely important to achieve even treadwear and maximum tire mileage. Goodyear recommends you refer to the vehicle’s owner manual for rotation intervals and rotation pattern recommendations.

Tire Tip #19: Pump Up for Pothole Protection

Source: Safety Tips on Tires (Tire Industry Safety Council)

by Kristen Karczewski, Director

There are some important things you can do to minimize damage to your tires, rims and alignments.

Tire Tip #87: You can help maximize the life of your tires by remembering TRAIL

Source: American Car Care Centers website

Inspection extensions

You can receive an inspection extension if you buy or get a vehicle from an out-of-state source. After you register the vehicle in NYS, you are allowed ten days to complete the vehicle inspection. Any inspection issued to the previous registrant is not valid after you register the vehicle.

If you become a New York state resident

If you become a resident of NYS and register your vehicle in NYS, your out-of-state inspection remains valid. The out-of-state certificate or inspection sticker issued in your name is valid until it expires, or for one year after the vehicle is registered in NYS, whichever comes first. When your out-of-state inspection expires, you must get the vehicle inspected in NYS.

What items does NY State Require be checked for the Safety Inspection?

Seat Belts
Brakes
Steering, Front End, Suspension, Chassis, Frame and Wheel Fasteners
Tires (Except spare)
Lights
Windshield and Other Glass
Windshield Wipers and Blades
Horn
Mirrors
Fuel Leaks
Tinted Windows (effective Jan.17)

See full details of the requirements here.

What are the Emissions Inspection requirements?

(Excerpt taken directly from NY State DMV Website)

The 1990 Federal Clean Air Act requires New York State to conduct an inspection program to help reduce harmful emissions from most passenger cars and light-duty trucks. The emissions inspection is done at the same time as the annual safety inspection. Vehicles that fail the emissions inspection may not be able to become registered or, if already registered, the registration may not be renewed.

On-Board Diagnostics Generation II (OBDII) Inspection. Most 1996 or newer gasoline-powered vehicles and most 1997 or newer diesel-powered vehicles that have a gross vehicle weight rating (GVWR) less than 8,501 pounds are subject to the OBDII emissions inspection. This test examines the Malfunction Indicator Lamp (MIL), also known as the "check engine" light, for operation/illumination, and verifies the test results of the vehicle's "on-board emissions diagnostic" system.

Low Enhanced Inspection. A "Low Enhanced" emissions inspection is required for most other vehicles, unless they are subject to the OBDII test or are exempt from all emissions inspections. This inspection is required for all vehicles from and including model year 1995 and older, through and including vehicles that are up to 25 model years old, and that weigh 18,000 lbs. or less.

Each emissions inspection for gasoline-powered vehicles confirms the presence and connection of the vehicle's required emissions control devices. This includes making sure that the vehicle's gas cap is present, is in good condition, and fits properly.

The following emissions control devices are examined if the vehicle was originally manufactured with them:

Catalytic converter (CAT)
Exhaust gas recirculation valve (EGR)
Positive crankcase ventilation system (PCV)
Air injection system (AIS)
Evaporative emissions control (EVAP)
Fuel inlet restrictor (FIR)
Thermostatic air cleaner (TAC)

You can help your vehicle pass an OBDII emissions inspection by keeping it properly maintained. If the vehicle's Malfunction Indicator Lamp (MIL, or "check engine" light) indicates there may be a malfunction or other problem, have the vehicle properly repaired. A well maintained, properly functioning vehicle uses less fuel and creates less exhaust emissions.